Audio-cd's kunnen niet correct worden gescand, afgespeeld en geript

Als audio-cd's niet correct worden afgespeeld, gescand of geript, kunt u een van de volgende oplossingen proberen. Controleer eerst of u de nieuwste versie van MediaMonkey gebruikt.

  1. Sommige systemen kunnen geen cd's rippen/branden, tenzij u bent ingelogd met beheerdersrechten.
    Om dit te omzeilen:
    • Meld u aan als Windows-gebruiker met beheerdersrechten OF;
    • Voer MediaMonkey uit in de geforceerde beheerdersmodus (klik met de rechtermuisknop op het MM-pictogram -> Uitvoeren als beheerder) OF;
    • Configureer Windows om niet-beheerders toe te staan schijven te branden Controleer of het cd-geluid niet is 'gedempt'. Dubbelklik op het luidsprekerpictogram in het systeemvak en zorg ervoor dat 'dempen' niet is aangevinkt voor zowel Wave/MP3 als CD Audio.
  2. Als u een CD/DVD-station hebt dat is aangesloten als station A of B, dan kunnen oudere versies van MediaMonkey het niet lezen. Om dit te wijzigen, moet u het bestand MediaMonkey.ini bewerken en de letter A of B verwijderen, indien van toepassing, uit de volgende sectie:
    [Systeem]
    NegeerDriveLetters=AB
  3. Sommige systemen ervaren stotteren bij het afspelen van CD's wanneer de CD/DVD-Rom Access is ingesteld op "Alleen PIO-modus" en niet op "DMA indien beschikbaar". U kunt dit in Windows als volgt wijzigen:
    • Klik met de rechtermuisknop op Deze computer > klik op Eigenschappen > selecteer het tabblad Hardware > klik op Apparaatbeheer
    • Klik met de rechtermuisknop op het IDE-kanaal waarop het station is aangesloten en selecteer het tabblad Geavanceerd
    • Als PIO wordt gebruikt, wijzigt u de instelling naar 'DMA indien beschikbaar'
    • Herstart en controleer in Apparaatbeheer > IDE-kanaal > Geavanceerd of DMA nu wordt gebruikt. Als dat niet het geval is, klikt u op het tabblad Stuurprogramma en vervolgens op 'Verwijderen'.
    • Opnieuw opstarten. Bij het opnieuw opstarten herkent Windows de drive doorgaans in DMA-modus.
    • Probeer MediaMonkey opnieuw als dit niet lukt om uw controller in de DMA-modus te zetten.
  4. Als u meerdere stations hebt, koppel dan alle externe CD/DVD-stations los. Op sommige systemen kunnen deze stations de interne stations verstoren.
  5. Sommige systemen spelen cd's correct af, maar kunnen ze niet rippen als 'Rip type' is ingesteld op 'Secure read'. Mogelijke oplossingen/workarounds zijn:
    • Werk de firmware van het CD/DVD-station bij naar de meest recente versie
    • Wijzig het Rip Type van 'Veilig lezen' naar 'Standaard lezen'
    • Gebruik “CFF Explorer.exe” van http://www.ntcore.com/exsuite.php om de 'File Header' te bewerken en schakel het selectievakje “App kan > 2GB adresruimte verwerken” uit voor MediaMonkey.exe en MediaMonkey (non-skinned).exe.
  6. Als u nog steeds foutmeldingen krijgt, probeer dan de plug-in in_cdreader.dll uit de plug-inmap te verwijderen (deze bevindt zich daar als u MediaMonkey 2.x hebt geïnstalleerd vóórdat u nieuwere versies installeerde).
  7. Sommige systemen kunnen geen cd's rippen/branden tenzij u bent ingelogd met beheerdersrechten. U kunt met de rechtermuisknop klikken waar u MediaMonkey start en Uitvoeren als beheerder selecteren.
    1. Als u nog steeds problemen ondervindt bij het afspelen van cd's en/of foutmeldingen van het type "Win32 Raw_Read" ontvangt, kan dit komen doordat u niet bent aangemeld als beheerder (Windows NT/2000/XP-systemen gebruiken standaard SPTI CD-stuurprogramma's en deze kunnen mislukken als de gebruiker niet is aangemeld als beheerder) of doordat ASPI-stuurprogramma's beschadigd zijn. Probeer het volgende:
      1. Uitloggen en opnieuw inloggen. Soms lost dit het beheerdersprobleem op.
      2. Als bovenstaande niet lukt, installeer dan versie 4.6 van de ASPI-stuurprogramma's van Adaptec.
        Meer informatie en werkende aspi-stuurprogramma's vindt u op: http://aspi.radified.com/aspi.htm
    2. Op sommige systemen kunnen Virtual CD-applicaties zoals Alcohol of DriveImage conflicteren met CD Playback en Ripping. Als u dergelijke applicaties hebt geïnstalleerd, probeer ze dan te verwijderen.

Geldt voor: ,

Translated automatically (see original)

Audio CDs fail to Scan, Play, Rip correctly

If Audio CDs don’t play, scan, or rip correctly try any of the following, after first verifying that you’re using the latest version of MediaMonkey.

  1. Some systems fail to rip/burn CDs unless logged in with Administrative rights.
    To get around this:
    • Log in as a Windows User with Administrative rights OR;
    • Run MediaMonkey in forced Admin Mode (Right Click on MM Icon -> Run as Administrator) OR;
    • Configure Windows to allow non-Administrators to Burn Discs Verify that CD sound hasn’t been ‘muted’. Double-click the speaker icon in the system tray, and ensure that ‘mute’ is not checked off for both Wave/MP3 and CD Audio.
  2. f you have a CD/DVD drive that is connected as drive A or B then older versions of MediaMonkey won’t read it. To change this, you’ll need to edit the MediaMonkey.ini file and remove the letter A or B as appropriate from the following section:
    [System]
    IgnoreDriveLetters=AB
  3. Some systems experience stuttering on CD playback when the CD/DVD-Rom Access is set to “PIO Mode Only” and not To “DMA if Available”. You can change this in Windows as follows:
    • Right-click on My Computer > click Properties > select Hardware tab > click Device Manager
    • Right click on the IDE channel to which the drive is connected and select the advanced tab
    • If PIO is used, change the setting to ‘DMA if available’
    • Reboot and check in Device Manager > IDE Channel > Advanced whether DMA is now being used. If it isn’t, click the Driver tab and then click ‘uninstall’.
    • Reboot. On reboot, Windows will usually recognize the drive in DMA mode.
    • Try MediaMonkey again If this fails to set your controller to DMA mode.
  4. If you have multiple drives, try disconnecting any external CD/DVD drives–on some systems, they may interfere with internal drives.
  5. Some systems will play CDs correctly, but will fail to rip them if the ‘Rip type’ is set to ‘Secure read’. Possible solutions/workarounds are to:
    • Update the CD/DVD drive’s firmware to the most recent version
    • Switch Rip Type from ‘Secure read’ to ‘Standard read’
    • Use “CFF Explorer.exe” from http://www.ntcore.com/exsuite.php to edit the ‘File Header’ and DISABLE the checkbox “App can handle > 2GB address space” for MediaMonkey.exe and MediaMonkey (non-skinned).exe.
  6. If you still experience error messages, try deleting the in_cdreader.dll plug-in from the plugins directory (it will be there if you had installed MediaMonkey 2.x prior to installing more recent versions).
  7. Some systems fail to rip/burn CDs unless logged in with Administrative rights. You can right click where you launch MediaMonkey and select Run as Administrator.
    1. If you continue to have problems playing CDs and/or receive “Win32 Raw_Read” error messages, this may be occurring because you are not logged in as Administrator (Windows NT/2000/XP systems use SPTI CD drivers by default, and these can fail if the user is not logged in as Administrator) or because ASPI drivers have been corrupted. Try:
      1. Logging out and back in. This sometimes resolves the Administrator problem.
      2. If the above fails, install version 4.6 of Adaptec’s ASPI drivers.
        More information & working aspi drivers may be found at: http://aspi.radified.com/aspi.htm
    2. On some systems, Virtual CD applications such as Alcohol or DriveImage can conflict with CD Playback and Ripping. If you have any such applications installed, try uninstalling them.

Applies to: ,

Hide original

Was dit artikel nuttig?