Migreren van iTunes, Windows Media Player, jRiver, MusicMatch, etc. naar MediaMonkey

U kunt relatief eenvoudig migreren van andere applicaties naar MediaMonkey voor Windows als de Player tags opslaat naar de bestanden volgens de standaarden en export van afspeellijsten toestaat. MediaMonkey voor Windows kan beperkte gegevens rechtstreeks uit sommige applicaties lezen.

MediaMonkey voor Windows importeert:

  • Bestandseigenschappen: van bestandstags
  • Afspeellijsten: van .m3u, .m3u8, .pls, .asx en .xspf bestanden
  • Bestandsbeoordelingen en afspeelgeschiedenis: uit databases van Windows Media Player, iTunes en WinAmp.
  • Albumhoezen: ingesloten in bestandstags en in mappen die bestanden uit één album bevatten (iTunes gebruikt een gepatenteerde methode voor hoezen die niet door andere spelers zoals MediaMonkey kan worden gebruikt).

Een volledige beschrijving van de tags die worden ondersteund, vindt u in de online Help: Help: Trackeigenschappen en tagindelingen

Voordat u overstapt van uw huidige speler, moet u het volgende doen:

  1. Zorg ervoor dat de software tags naar de bestanden heeft opgeslagen. Dit is mogelijk niet een functie op alle software.
    1. Wanneer tags ontbreken, kunt u dit probleem omzeilen door de map-/bestandsnamen te gebruiken om uw bestanden te taggen in MediaMonkey voor Windows. Hiervoor kiest u Extra > Taggen vanuit bestandsnaam in het hoofdmenu (Automatisch taggen vanuit bestanden in MediaMonkey voor Windows 5 en ouder).
    2. MediaMonkey voor Windows slaat tags standaard op in de bestanden , maar u kunt de databasewaarden ook opslaan via Extra > Tags bewerken > Tags bijwerken (MediaMonkey voor Windows 5+) of Extra > Geavanceerd tagbeheer > Tags synchroniseren (MediaMonkey voor Windows 4).
  2. Exporteer alle afspeellijsten van de speler naar een formaat zoals M3U-bestanden.
    1. Raadpleeg de documentatie bij uw speler voor meer informatie over hoe u dit voor die specifieke speler kunt doen. U kunt ook online zoeken/video's raadplegen voor meer informatie.
    2. Om deze afspeellijsten aan MediaMonkey toe te voegen, gaat u naar Bestand > Bestanden toevoegen/opnieuw scannen in het hoofdmenu en zorgt u ervoor dat het bestandstype van de afspeellijst (bijvoorbeeld M3U) is ingeschakeld voor scannen onder Opties (MediaMonkey voor Windows 5+) of Bestandstypen (MediaMonkey voor Windows 4) in het dialoogvenster Bestanden toevoegen/opnieuw scannen.
    3. Geïmporteerde afspeellijsten worden weergegeven onder het knooppunt Afspeellijsten > Geïmporteerde afspeellijsten in de mediaboom.
    4. Als Playlists geen bestanden tonen bij import, betekent dit dat ze leeg zijn of dat ze verwijzen naar een plek waar de bestanden niet meer bestaan. U kunt elke teksteditor (zoals Kladblok) gebruiken om de paden te verifiëren die de Playlists gebruiken voor de bestanden en deze paden te wijzigen als ze onjuist zijn vóór het importeren.
    5. In MediaMonkey kunt u Bestand > Rapporten maken > Alle afspeellijsten exporteren (MediaMonkey voor Windows 5+) of Extra > Scripts > Alle afspeellijsten exporteren (MediaMonkey voor Windows 4) gebruiken in het hoofdmenu als u alle afspeellijsten uit MediaMonkey voor Windows wilt exporteren.
  3. Als er andere informatie in een muziekdatabase staat die MediaMonkey voor Windows niet kan lezen (bijvoorbeeld beoordelingen in jRiver Media Center of voorkeuren in MusicMatch, enz.), is er een tijdelijke oplossing waarmee u categorisatiegegevens kunt importeren:
    1. Selecteer in uw huidige mediamanager alle bestanden in een bepaalde categorie (bijv. alle bestanden met een beoordeling van '2') en maak er een afspeellijst van. Herhaal dit voor elke waarde.
    2. Exporteer de afspeellijst in uw huidige mediamanager (bijv. Rating2.m3u )
    3. Scan met MediaMonkey voor Windows de map met de nieuwe afspeellijst.
    4. Selecteer in MediaMonkey voor Windows alle bestanden uit de nieuwe afspeellijst (bijvoorbeeld Afspeellijsten > Geïmporteerde afspeellijsten > Beoordeling2 ), klik met de rechtermuisknop en kies Bewerken > Eigenschappen in het hoofdmenu.
    5. Bewerk de tag die u wilt wijzigen (verander in dit geval bijvoorbeeld de beoordeling naar '2 sterren') en klik op 'OK' om alle bestanden in één keer bij te werken.

Geldt voor: ,

Translated automatically (see original)

Migrating from iTunes, Windows Media Player, jRiver, MusicMatch, etc. to MediaMonkey

You can migrate from other applications to MediaMonkey for Windows relatively easily if the Player saves tags to the files following the standards and allows for export of Playlists. MediaMonkey for Windows can read limited data from some applications directly.

MediaMonkey for Windows imports:

  • File properties: from file tags
  • Playlists: from .m3u, .m3u8, .pls, .asx and .xspf files
  • File Ratings and Play History: from Windows Media Player, iTunes, and WinAmp databases.
  • Album Art: embedded in file tags and any saved in folders that contain files from a single album (iTunes uses a proprietary method for Artwork which isn’t available to be used by other Players like MediaMonkey).

A full description of tags that are supported appears in the Online Help: Help: Track Properties & Tag Formats

Before switching from your existing player you should:

  1. Make sure that the software has saved tags to the files. This may not be a feature on all software.
    1. When tags are missing a work-around is to use the folder/filenames to tag your files in MediaMonkey for Windows with Tools > Tag from Filename from the Main Menu (Auto-Tag from Files in MediaMonkey for Windows 5 and older).
    2. MediaMonkey for Windows by default saves tags to the files, but can be forced to save database values using Tools > Edit Tags > Update Tags (MediaMonkey for Window 5+) or Tools > Advanced Tag Management > Synchronize Tags (MediaMonkey for Window 4).
  2. Export all playlists from the player to a format like M3U files.
    1. Review documentation for your Player on how to do this for that specific Player or use online search/videos for guidance.
    2. To add these Playlists to MediaMonkey use File > Add/Rescan Files from the Main Menu and make sure the Playlist File Type (like M3U) is enabled for scanning under Options (MediaMonkey for Windows 5+) or File Types (MediaMonkey for Window 4) in the Add/Rescan Files dialog.
    3. Imported Playlists will show under the Playlists > Imported Playlists node in the Media Tree.
    4. If Playlists show no files on import it means that either they’re empty or they point to where the files no longer exist. You can use any text editor (like Notepad) to verify the Paths the Playlists uses for the files and modify these Paths if incorrect prior to import.
    5. In MediaMonkey you can use File > Create Reports > Export All Playlists (MediaMonkey for Window 5+) or Tools > Scripts > Export All Playlists (MediaMonkey for Window 4) from the Main Menu if you wish to export all Playlists from MediaMonkey for Window.
  3. If there is other information in a music database that MediaMonkey for Window can’t read (e.g. Ratings in jRiver Media Center, or Preferences in MusicMatch, etc.) there’s a workaround that can be used to import categorization data:
    1. In your current media manager, select all of the files in a given category (e.g. all files that have a rating of ‘2’) and create a Playlist of them. Repeat this per each value.
    2. In your current media manager, export the Playlist (e.g. Rating2.m3u)
    3. With MediaMonkey for Window, scan the directory containing the new Playlist.
    4. In MediaMonkey for Window select all the files from the new Playlist (e.g. Playlists > Imported Playlists > Rating2) and right-click and use Edit > Properties from the Main Menu.
    5. Edit the Tag that you wish to change (e.g. in this case, change Rating to ‘2 stars’) and click ‘OK’ to update all the files at once.

Applies to: ,

Hide original

Was dit artikel nuttig?