De WASAPI-uitvoerplug-in gebruiken in MediaMonkey

WASAPI (Windows Audio Session API) is een Windows-interfacemodus waarmee een ongewijzigde bitstream naar een geluidsapparaat kan worden verzonden. Het kan ook applicaties exclusieve toegang tot audioapparaten bieden, waarbij effecten (bijv. systeemmixer) die door de audiodriver worden geleverd, worden omzeild.

Voordat u de WASAPI-modus in MediaMonkey configureert, moet u de juiste audiodrivers voor uw DAC installeren en controleren of de drivers werken. Meestal zijn er geen speciale instellingen of opties in de drivers nodig om de WASAPI-modus te ondersteunen.


Om de WASAPI-modus in MediaMonkey te configureren, voert u MediaMonkey uit en:

  1. Ga naar Extra > Opties > Uitvoerplug-ins in het hoofdmenu
  2. Klik op de keuzerond naast MediaMonkey WASAPI-uitvoer

De MediaMonkey-speler speelt nu geluid af via de WASAPI-driver.

Als er problemen zijn met het geluid (bijvoorbeeld klikken) kunt u de WASAPI-instellingen naar wens aanpassen of instellen op het gebruik van specifieke ondersteunde modi. Bijvoorbeeld:

  • Als het geluid hapert, controleer dan of u de drivers voor uw audiochipset/audiokaart hebt bijgewerkt.
  • Als u ruis hoort wanneer u een DSP-plug-in gebruikt of tracks tagt, probeer dan de exclusieve modus in te schakelen. Deze modus heeft opties voor:
    • Een specifiek formaat op basis van uw audiohardware
    • Automatische keuze van formaat (per track) – vraagt de kaart naar ondersteunde modi en kiest degene die het dichtst (het beste) bij het bronformaat van de track ligt
    • Formaat van de originele track – in geval van driverproblemen zal deze modus de kaart niet raadplegen en start het afspelen in de originele track-indeling. Als dat mislukt, probeert het de kaart te raadplegen.
  • Sommige apparaten ondersteunen de event-driven-modus niet. Schakel de event-driven-modus uit en gebruik de push-modus als u klikken tussen tracks ervaart
  • In sommige omgevingen kunt u afspeelproblemen oplossen door de buffergrootte te vergroten tot 500 ms (via de geavanceerde instellingen).

Als er geen geluid wordt afgespeeld via WASAPI, kan dit komen door een conflict dat is ontstaan doordat de exclusieve WASAPI-modus in meerdere toepassingen is ingeschakeld (bijv. MediaMonkey 4 en MediaMonkey 2024). Probeer in dergelijke gevallen de exclusieve modus uit te schakelen in de WASAPI-instellingen (zie hieronder) en/of voor het audioapparaat (klik op het luidsprekerpictogram, vervolgens op 'Volumemixer' en klik vervolgens op het uitvoerapparaat, bijvoorbeeld 'Luidsprekers'. Klik vervolgens op het tabblad 'Geavanceerd' in Luidsprekereigenschappen en schakel 'Toepassingen toestaan exclusieve controle over dit apparaat te nemen' uit).

WASAPI configureren:

  1. Ga naar Extra > Opties > Uitvoerplug-ins in het hoofdmenu
  2. Selecteer 'MediaMonkey WASAPI-uitvoer'
  3. Klik op Configureren
  4. Op de configuratiepagina van de MediaMonkey WASAPI-uitvoerplug-in…
    1. Selecteer uw WASAPI-compatibele apparaat als uw uitvoerapparaat (u kunt ook 'Standaardapparaat' selecteren als u uw standaard Windows-apparaat voor de uitvoer wilt gebruiken).
    2. Selecteer/deselecteer Exclusieve modus (indien nodig).
    3. Selecteer in de exclusieve modus ‘Automatische keuze van formaat (per track)’.
    4. Als uw apparaat de PUSH-modus ondersteunt, maar niet de EVENT-modus (zoals Emotiva DAC)
      1. Klik op Geavanceerd.
      2. Vink het vakje uit naast “Event-driven exclusieve modus (aanbevolen)” en “Event-driven gedeelde modus (aanbevolen)”.
      3. Klik op OK totdat u terug bent op het hoofdscherm van MediaMonkey en sluit de opties.

Geldt voor: ,

Translated automatically (see original)

Using the WASAPI output plug-in in MediaMonkey

WASAPI (Windows Audio Session API) is a Windows interface mode that allows an unmodified bitstream to be delivered to a sound device. It can also provide applications with exclusive access to audio devices, bypassing effects (e.g. system mixer) provided by the audio driver.

Before configuring WASAPI mode in MediaMonkey, you should install the appropriate audio drivers for your DAC and verify that the drivers are working. Usually, there aren’t any special settings or options in the drivers necessary to allow them to support WASAPI mode.


To configure WASAPI Mode in MediaMonkey, run MediaMonkey and:

  1. Go to Tools > Options > Output Plug-ins from the Main Menu
  2. Click the radio button next to MediaMonkey WASAPI output

The MediaMonkey player will now play sound via the WASAPI driver.

If there are problems with the sound (e.g. clicks) you can tweak the WASAPI settings to your liking or set it to use specific supported modes. For example:

  • If audio stutters make sure that you’ve updated the drivers for your audio chipset/card.
  • If you hear static whenever you use a DSP plugin or tag tracks, try enabling Exclusive mode. This mode has options for:
    • A specific format based on your audio hardware
    • Automatic choice of format (per track) – asks the card for supported modes and chooses the one that’s closest (best) for the source format of the track
    • Format of the original track – in case of driver problems, this mode won’t query the card and starts playback in the track’s original format. If that fails, it attempts to query the card.
  • Some devices don’t support event driven mode. Disable event driven mode and use push mode if you experience clicks between tracks
  • In some environments, increasing the buffer size to 500ms (via the Advanced settings) can solve playback problems.

If no sound plays via WASAPI, it can be due to a conflict caused when WASAPI exclusive mode is enabled in multiple applications (e.g. MediaMonkey 4 and MediaMonkey 2024). In such cases, try disabling exclusive mode in the WASAPI settings (see below) and/or for the audio device (Click the speaker icon, then ‘Volume Mixer’, then click the output device e.g. ‘Speakers’, then click the ‘Advanced’ tab in Speaker Properties, and disable ‘Allow applications to take exclusive control of this device’).

To configure WASAPI:

  1. Go to Tools > Options > Output Plug-ins from the Main Menu
  2. Select ‘MediaMonkey WASAPI output’
  3. Click Configure
  4. On the MediaMonkey WASAPI output plugin configure page…
    1. Select Your WASAPI Compatible device as your output device (you may also select ‘Default device’ if you’ll be using your Windows default device for output).
    2. Check/Uncheck Exclusive Mode (as needed).
    3. Under Exclusive Mode select “Automatic choice of format (per track)”.
    4. If your device supports PUSH mode but not EVENT mode (like Emotiva DAC)
      1. Click Advanced.
      2. UNCHECK the box next to “Event driven Exclusive mode (recommended)” and “Event driven Shared mode (recommended)”.
      3. Click on OK till you go back MediaMonkey main screen and close options.

Applies to: ,

Hide original

Was dit artikel nuttig?